射频工程师offer选择

大家好呀，

刚刚研究生毕业，现在有两个offer，都是射频工程师岗位。

第一个是advantest，就是普通的RF HW engineer，具体职责以下（HM邮件发给我的）：
The specific tasks depend on the state of development, where we are. Developing a product takes about three to four years. Right now, we are in the phase, where we will tape out (hopefully) production-ready prototypes soon. They should arrive around August and then the whole team will work on characterizing the hardware, so your first task would be something about getting to know our system by making measurements and judging, whether or not the hardware behaves as expected (Existing measurements and system simulation). The next 12 months will then focus on ramping the production (A good phase to learn about quality for future designs), running qualifications (Climate, compliance) and creating the specifications. The start of the actual design for a new generation of products might be around end of next year. Then, we will start with simulating, thinking, designing… (The usual design process).
Your position (in contrast to the other, specialized position) is more broadly and your tasks will depend on what needs to be done but also (especially mid-term) on what you are interested in. You might want to design a PLL, microstrip filters, power supply, a signal chain, a DSP ASIC design… It’s not as strictly defined, and many people develop over time by constantly trying out different things.
Also, if you like to cover digital topics, there is a possibility. We use DACs and ADCs and they have digital interfaces to our Testprocessor.
感觉就是作为一个新人，先跟着团队学系统然后根据自己兴趣在选一个方向。

第二个就是Trumpf，是基于 工业用大功率放大器以及射频器件的开发。岗位指责就是。
-Development of solid-state power amplifier stages and other RF-components for high frequency generators at 13.56 MHz and other RF and VHF frequencies
-Development of power combiners for the power classes of 30 to 150 kW
-Conception and simulation of the circuits with Keysight ADS and Ansys HFSS
-Assembly of prototypes, initial operation and verification of the generators under laboratory and real-world conditions
-Writing automation software for device testing
-Cooperation with PCB design, mechanical construction, production, and software departments
-Participation in the preparation of product specifications, occasional visits to customers (U.S.A., Far East)

不知道怎么选，因为在德国本土所以薪资差不多，主要是看前景怎么样。谢谢拉！