请问下CV里面的研究经历要如何写呢？

参加过实验室的一些研究，还混了文章的3作……
在CV里面，只要说自己做了什么吗？还是写出实验的困难、意义和解决过程？
论坛里看到的大部分的CV里面都是社会活动的比较多
想问下科研经历一般怎么写？谢谢

bloodyliao 发表于 2016-9-26 19:46
比如这两个不同的写法：
Porotype of Ultra-sensitive Label-free Optofluidic Microbubble Biosensor
Im ...

你这是PS吧……CV就是简单的分点列举

制备了什么，测试了什么之类的

CV里只要简单介绍一下实验，然后说说自己做了什么就可以了吧

比如这两个不同的写法：
Porotype of Ultra-sensitive Label-free Optofluidic Microbubble Biosensor
Improved the fabrication technology of microbubble resonator, making it accessible to control the diameters and wall thickness of resonators, which provides significant improvement of sensitivity in sensing. This is one of the core issues in this project.
Modified the modification protocol of sensing surface and increase the number of bound analyte molecules to generate a detectable signal above the noise floor in extremely low analyte concentration level.

Porotype of Ultra-sensitive Label-free Optofluidic Microbubble Biosensor
For a reliable and sensitive optofluidic microbubble biosensor, the control over the geometrical parameters of resonator is essential, since it contributes greatly to the energy distribution in the sensing surface and thus the sensitivity. To achieve this, I studied and made comparison of various methods in optical resonator fabrication. Without complicated and costly equipment, I improved the fabrication technology, capable to control the geometrical features of resonators. The easy and fast access to resonators with wanted features provides significant improvement in sensing performance.
To further improve the detection limit, I modified the modification protocol of sensing surface, which would increase the number of bound analyte molecules and generate a detectable signal above the noise floor in extremely low analyte concentration level.

哪一个更加合适呢？CV要求简介，但是太简洁又仅仅给人留下做了XXX，取得了XXX的印象……不是很能突出研究的能力……
大家觉得呢？

CV里写的应该是这样比较好吧
Patch-Based Plenoptic Image Manipulation
2013 年 8 月
• Focused on editing the light field captured by the lenselet devices and synthesize new light field data
• Proposed a fast way to recover the depth information based on plenoptic imaging technique and used the cost-volume filter to refine the depth map
• Given the definition of patch in the plenoptic image and the similarity measurement and used it to implement several manipulation (e.g. reshuffle, completion, copy, etc.)
• Advisor:
• Paper submitted to IEEE Transactions on Visualization and Computer Graphics

空空道友 发表于 2016-9-27 08:29
CV里写的应该是这样比较好吧
Patch-Based Plenoptic Image Manipulation
2013 年 8 月

好的，谢谢你了