0.1 基础- 机械转码- 刷题记录

我目前没有私信功能~    方便留下联系方式吗？ 或者，要不要建立一个刷题转码群？

BirdPlay6 发表于 2018-8-6 06:43
我目前没有私信功能~    方便留下联系方式吗？ 或者，要不要建立一个刷题转码群？

微信吧，账号：shentaihao， 这帖子人越来越多的话我就微信建个群大家一起加油！

junhezfm 发表于 2018-8-6 04:21
对于机械转码我倒觉得前端是个好出路，普通SDE的话要补的东西太多了....

除了数据结构和算法 leetcode  还需要补哪些？

一起刷刷刷刷刷刷刷刷刷

拉个群吧~  一起刷刷刷~

BirdPlay6 发表于 2018-8-6 07:14
除了数据结构和算法 leetcode  还需要补哪些？

CS那些基础课还有进阶课吧，操作系统架构分布式等等...保不齐面试会被问

taihao0602 发表于 2018-8-6 06:39
可是前端的工作给H1B的会不会很少？

可能吧...但个人感觉对于强转的来说成功率可能高点

你如果是做Mechatronics Engineering的，如果还想做ME，不妨试试。要不前面学的就废了。  AUTOMATION SYSTEMS ENGINEER FT - Exempt with Benefits  Requisition ID : 1139  APPLY   Company Overview  Mini-Circuits, located in Brooklyn NY, designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications.  With design, sales and manufacturing locations in over 30 countries, Mini-Circuits’ products are used in a range of wired and wireless communications applications. Our products are used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment.  Mini-Circuits products are sold to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive web site.  Position Summary – Automation Systems Engineer   To create and improve automated assembly, inspection & production test systems, and device handlers, applicable to RF & Microwave components.  JOB FUNCTIONS  Analyze all aspects of assembly/inspection & mechanical test processes, and identify where automation can be justified based on needs for capacity, efficiency and process control.  Provide technical information, definition and process flowcharts of flexible and saleable automation alternatives.  Prepare project plan proposals for automation including objective, scope, expected outcomes, resources required, and budgeted costs.  Take leadership in communication with project stakeholders through the duration of the project FROM concept, feasibility, procurement/ manufacturing TO qualification. Create documentation of each phase of a project, SOW, qualification/buy-off test plans, qualification report, operational manual. Responsible for training the end-users and the equipment support personnel.   Provide solutions & support for continuous improvement of the existing automated systems. Keep track of engineering changes (ECNs) and update the necessary ISO-controlled documents.  Keep up-to-date with the latest developments in the related technical fields REQUIRED QUALIFICATIONS  BS/ MS in Automation, Electrical or Mechatronics Engineering.    At least one year of RELATED work experience (including internships). Able to define, develop and deploy automation.  Knowledge of automation systems and tools.  Real experience in programming microcontrollers utilizing C/C++.   Real experience with analytical software, advanced Excel, MS Project and MS Word. Real experience with mechanical tooling and creating fixtures. Practical knowledge of machine sensors,automated test & inspection systems. Solidworks or AutoCAD.   Excellent manual dexterity with a detail-oriented personality. Excellent communication and creative thinking skills, a team player. Strong work ethic, goal-oriented, passionate & wanting to meet or exceed company’s high expectations. Ability to work in a fast-changing, quality-oriented, continuous improvement & dynamic environment. Knowledge of Lean Manufacturing and ISO manufacturing requirements.  Knowledge of project costing and ROI Practical experience in efficiency optimization OEE analysis (Overall Equipment Efficiency).   Ability to easily walk, bend and work on a desktop for long periods of time. Ability to lift up to 50 lbs on occasion. DESIRED QUALIFICATIONS  Real experience with or knowledge of:  Feeding and packing systems  Conveyer speed/position controls  Pneumatic controls and components  Liquid dispensing processes   We offer a competitive salary commensurate with experience and education level.    Only local candidates will be considered.      MINI-CIRCUITS IS PROUD TO BE AN EQUAL OPPORTUNITY EMPLOYER.  ALL QUALIFIED APPLICANTS WILL RECEIVE CONSIDERATION WITHOUT REGARD TO RACE, GENDER, RELIGION, NATIONAL ORIGIN, AGE, MARITAL, DISABILITY, VETERAN OR UNEMPLOYMENT STATUS, GENETIC INFORMATION, SEXUAL ORIENTATION, AMNESTY, CITIZENSHIP, IMMIGRATION STATUS, OR ANY OTHER STATUS PROTECTED BY APPLICABLE LAWS, REGULATIONS OR ORDINANCES, UNLESS OTHERWISE REQUIRED BY APPLICABLE LAW.

你如果是做Mechatronics Engineering的，如果还想做ME，不妨试试。要不前面学的就废了。  

AUTOMATION SYSTEMS ENGINEER

FT - Exempt with Benefits  

Requisition ID : 1139  APPLY   

Company Overview  Mini-Circuits, located in Brooklyn NY, designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications.  With design, sales and manufacturing locations in over 30 countries, Mini-Circuits’ products are used in a range of wired and wireless communications applications. Our products are used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment.  Mini-Circuits products are sold to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive web site.  

Position Summary – Automation Systems Engineer   

To create and improve automated assembly, inspection & production test systems, and device handlers, applicable to RF & Microwave components.  JOB FUNCTIONS  Analyze all aspects of assembly/inspection & mechanical test processes, and identify where automation can be justified based on needs for capacity, efficiency and process control.  Provide technical information, definition and process flowcharts of flexible and saleable automation alternatives.  Prepare project plan proposals for automation including objective, scope, expected outcomes, resources required, and budgeted costs.  Take leadership in communication with project stakeholders through the duration of the project FROM concept, feasibility, procurement/ manufacturing TO qualification. Create documentation of each phase of a project, SOW, qualification/buy-off test plans, qualification report, operational manual. Responsible for training the end-users and the equipment support personnel.   

Provide solutions & support for continuous improvement of the existing automated systems. Keep track of engineering changes (ECNs) and update the necessary ISO-controlled documents.  Keep up-to-date with the latest developments in the related technical fields

REQUIRED QUALIFICATIONS  BS/ MS in Automation, Electrical or Mechatronics Engineering.   

At least one year of RELATED work experience (including internships).

Able to define, develop and deploy automation.  
Knowledge of automation systems and tools.  
Real experience in programming microcontrollers utilizing C/C++.   

Real experience with analytical software, advanced Excel, MS Project and MS Word.
Real experience with mechanical tooling and creating fixtures.
Practical knowledge of machine sensors,automated test & inspection systems.
Solidworks or AutoCAD.   
Excellent manual dexterity with a detail-oriented personality.
Excellent communication and creative thinking skills, a team player. Strong work ethic, goal-oriented, passionate & wanting to meet or exceed company’s high expectations. Ability to work in a fast-changing, quality-oriented, continuous improvement & dynamic environment.
Knowledge of Lean Manufacturing and ISO manufacturing requirements.  
Knowledge of project costing and ROI Practical experience in efficiency optimization OEE analysis (Overall Equipment Efficiency).   
Ability to easily walk, bend and work on a desktop for long periods of time. Ability to lift up to 50 lbs on occasion.

DESIRED QUALIFICATIONS  Real experience with or knowledge of:  

Feeding and packing systems
Conveyer speed/position controls  
Pneumatic controls and components  
Liquid dispensing processes   

We offer a competitive salary commensurate with experience and education level.    Only local candidates will be considered.      MINI-CIRCUITS IS PROUD TO BE AN EQUAL OPPORTUNITY EMPLOYER.  ALL QUALIFIED APPLICANTS WILL RECEIVE CONSIDERATION WITHOUT REGARD TO RACE, GENDER, RELIGION, NATIONAL ORIGIN, AGE, MARITAL, DISABILITY, VETERAN OR UNEMPLOYMENT STATUS, GENETIC INFORMATION, SEXUAL ORIENTATION, AMNESTY, CITIZENSHIP, IMMIGRATION STATUS, OR ANY OTHER STATUS PROTECTED BY APPLICABLE LAWS, REGULATIONS OR ORDINANCES, UNLESS OTHERWISE REQUIRED BY APPLICABLE LAW.

现在跨专业申请IT岗位的H1很危险。很可能办不下来。

有EE背景的申请的前端工程师去年杯具的，今年还不知道怎么样。

如果本专业走得下去，还是现在本专业里面抽H1吧。

上面岗位，第一年可以办H1.